tube parts
英 [tjuːb pɑːts]
美 [tuːb pɑːrts]
配管部件
双语例句
- If this is not done, some parts of the tube will be stretched more than other parts, and this puts a strain on the tube that might cause it to Blow out.
如果不这样做，内胎的某一部分就比其它部分膨胀的更多，这一部分内胎可能就会因拉的过紧而引起爆裂。 - Every branch tube part is configured by the method that the branch tube parts are inserted between the processing bodies with mutually different height positions.
各支管部以插在高度位置彼此不同的被处理体之间的方式进行配置； - Single-motor construction, simp, e screw tube design, few operating parts.
单电机，螺纹管设计结构简洁，传动件少。 - Generally, the value of vacuum in draft tube is composed of three parts, namely dynamic vacuum, static vacuum and negative water hammer pressure.
尾水管真空度一般由动力真空、静力真空以及尾水管进口负水击压力三部分叠加而成。 - The pulse tube refrigerator contains no moving parts at its cold head and has considerable system advantages over most other types of cryogenic refrigerators in terms of reliability, lifetime, vibration and cost.
由于它在低温下没有运动部件，较其它类型的制冷机具有振动小、可靠性高、寿命长、造价低等优越性。 - Algorithm Design of the Deep Pulling Technology of Tube Shaped Parts
圆筒形拉深件拉深工艺的算法设计 - The new technology is especially fit for working big diameter and high precision tube parts.
这对于加工大直径、高精度的管类件具有重要的意义。 - The patterns of influence of tube type, insert parts and air velocity on air heat transfer coefficient, air pressure loss, mean temperature of tube surface and air preheated temperature were also analysed respectively.
具体分析了管形、插入件及空气流速对空气侧给热系数、阻力损失、管壁温度和空气预热温度的影响。 - By ensuring the temperature of molten steel fore quick change and after, improving the baking quality of tundish and submerged tube and adopting attaching parts to connect the joins, No. 3 Steel-making Plant of Jigang has realized the tundish quick-change, which time is 2~ 3min.
济钢第三炼钢厂通过确保快换前后的钢水温度、提高中间包及浸入式水口的烘烤质量以及采用连接件连接接头等措施，实现了中间包快换，快换时间为2～3min。 - The paper discusses the points and details process of the Drawing Technology in Tube-Shaped parts, and try to CAD System of the drawing die.
论述了筒形件拉深工序设计中的关键问题和详尽的处理流程，并对筒形件拉深模CAD系统开发进行了尝试。 - 3D FEM Simulation Analysis of Piling And Spining Force of Forward Flow Forming for Tube Parts
筒形件正旋隆起及旋压力三维有限元模拟分析 - Installed the high speed spinning tube and other machine parts, the framework junction parts is designed not only strength enough but also higher accuracy in dimensional and plane.
该框架结构件上装有高速运转纱筒和其他机件，设计要求框架不但有足够的强度而且有较高的尺寸精度和平面度。 - The said damping tube is one of the force-applied parts of front telescope type absorber.
摩托车减震器前叉减振柱是套筒式前减震器的主要受力件之一。 - Simulation and optimization of the upset forging process of tube parts
管坯镦锻工艺仿真及优化 - A few kinds of FEA model about heat exchanger structure stress analysis were discussed, and the model to solve this thesis's problem was put forward: tube was simulated by truss element and other parts of structure were simulated by solid element.
讨论了几种换热器结构有限元分析模型的特点，提出了针对本文问题的有限元模型：用杆单元模拟换热管，其它部分用实体单元来模拟。 - New technology of power spinning for tube parts& floating mandrel spinning
筒形件强力旋压新技术&浮动芯模法 - Analysis on Leakage of Boiler Tube and Pressure Parts of DG 670 t/ h Boiler
DG670t/h锅炉四管及承压部件泄漏分析 - However there are many defects such as springback, shrinking, break, flattening and so on in the NC bending process of thin-wall and large diameter tube parts.
在民机上，这些导管类零件相当一部分是大直径薄壁导管件，在加工制造过程中易出现回弹、起皱、破裂、圆弧处变扁等成形缺陷。 - Following sequences were done by SCK in order to keep shop fabricated steel tube trusses and other parts meet with the requirement of design and site assembly.
为使厂内制作的钢管桁架各构件满足设计要求，保证现场顺利拼接，借助计算机模型进行钢管桁架空间圆弧的放样和大直径钢管的火焰加工、厂内预组装； - The machining technology of forging tube makes the forging parts mass light, intension high, cost little and machining exactness. So it is the important aspect in 21 century in the forging and machining fields.
由于容易满足成形产品轻量化、强韧化和低耗高效、精确度高等方面的要求，管材塑性加工已成为先进塑性加工技术面向21世纪研究与发展的一个重要方向。 - Study on Cold Press Forming Progress of the Thick Wall Long Tube Parts
厚壁长筒形零件冷挤压成形工艺的研究 - The stern tube instrument, pivotal parts of ships, can not follow the traditional structure type and the routine static design technique any more. It has become the hotspot of the shipping industry in the world.
作为船舶关键部件的尾管装置已不能继续沿用传统的结构型式和常规的静态设计方法，这日益成为世界航运界关注的热点。 - Tube Bending is a technology of manufacture tube parts by deforming tube with a mold.
弯管是以管材作为毛坯，通过塑性加工手段，制造管类零件的加工技术。 - The forming and springback experiments of tube multi-point bending were carried out. The precision of springback analysis model for tube bending parts was verified by comparing the experimental results with the simulation results.
并进行了管材多点弯曲成形和回弹实验，通过对比实验结果和模拟结果，验证了管材弯曲回弹分析模型的可靠性。 - Axle tube flange parts itself complex geometric shape, high dimensional accuracy of the part, it led to the parts in plastic forming process complex process cumbersome, inefficient forming.
对于半轴套管法兰零件，由于本身几何形状复杂，零件的尺寸精密度很高，故导致了该零件塑性成形过程复杂，工序繁琐，成形效率很低。 - The spline tube differs greatly from the spline shaft parts in the cold roll forming process, which has a complex process with large blank deforming quantity.
花键管冷滚轧精密成形过程不同于花键轴类零件，其坯料金属变形量大，成形过程较为复杂。 - The motorcycle rear fork belongs to the suspension device of motorcycle, which mainly consists of left and right rear fork side tubes, axle tubes, connector tube, stiffener plates, installing linings and other parts.
摩托车平叉属于摩托车的悬挂装置，主要由左、右平叉侧管、平叉轴管、连接管、加强板和安装衬片等零部件组成。 - The stress and strain distribution of the deep-drawing forming process of the magnesium alloy tube parts in different stage and different region was analyzed.
分析了筒形件在拉深成形的不同阶段不同区域的应力应变分布。 - First it introduces the basic structure and working principle, it is composed of a motor, a buoy, adjusting bracket, a hollow shaft, the bearing sleeve, dome, propeller and a guiding tube is composed of eight parts.
首先介绍了它的基本结构和工作原理，它是由电动机、浮筒体、调整支架、空心轴、支承套筒、导流罩、螺旋桨和导流管八部分组成。 - Multi ways tube on air conditioning header is the main parts of condenser.
空调联箱多支管是空调冷凝器的主要零部件之一。